Can my desktop connect to the internet through my laptop's wireless connection?

I have a cable connection going to a wireless router in another room of my house and up until now I haven't had a desktop computer (It's been borked since we moved so I just haven't set it up). I finally set it up and realized that I didn't have a wireless card in it, I don't want to get a wireless card, and I don't want to run a 100 foot cable from one room to another. Can I use a cat-5 cable going from the ethernet port on my laptop to the ethernet port on my desktop and have my laptop connected wirelessly to the internet, and my desktop connecting through my laptop?

Asked by JDiPierro 41 months ago Similar questions: desktop connect internet laptop's wireless connection Computers > Hardware > Desktops & Laptops.

Similar questions: desktop connect internet laptop's wireless connection.

Absolutely! You fhave two options, purchase a WIRELESS BRIDGE device like the ones listed below that will connect to the wireless network and then plug into the ethernet port on your desktop computer -or- you can use what is called ’Internet Connetion Sharing’ with your laptop as the host by following the directions below! How to use Internet Connection Sharing To use Internet Connection Sharing to share your Internet connection, the host computer must have one network adapter that is configured to connect to the internal network, and one network adapter or modem that is configured to connect to the Internet.

On the host computer On the host computer, follow these steps to share the Internet connection: 1. Log on to the host computer as Administrator or as Owner. 2.

Click Start, and then click Control Panel. 3. Click Network and Internet Connections.4.

Click Network Connections. 5. Right-click the connection that you use to connect to the Internet.

For example, if you connect to the Internet by using a modem, right-click the connection that you want under Dial-up. 6. Click Properties.7.

Click the Advanced tab.8. Under Internet Connection Sharing, select the Allow other network users to connect through this computer’s Internet connection check box.9. If you are sharing a dial-up Internet connection, select the Establish a dial-up connection whenever a computer on my network attempts to access the Internet check box if you want to permit your computer to automatically connect to the Internet.10.

Click OK. You receive the following message: When Internet Connection Sharing is enabled, your LAN adapter will be set to use IP address 192.168.0.1. Your computer may lose connectivity with other computers on your network.

If these other computers have static IP addresses, it is a good idea to set them to obtain their IP addresses automatically. Are you sure you want to enable Internet Connection Sharing?11. Click Yes.

The connection to the Internet is shared to other computers on the local area network (LAN). The network adapter that is connected to the LAN is configured with a static IP address of 192.168.0.1 and a subnet mask of 255.255.255.0 On the client computer To connect to the Internet by using the shared connection, you must confirm the LAN adapter IP configuration, and then configure the client computer. To confirm the LAN adapter IP configuration, follow these steps: 1.

Log on to the client computer as Administrator or as Owner.2. Click Start, and then click Control Panel.3. Click Network and Internet Connections.4.

Click Network Connections. 5. Right-click Local Area Connection, and then click Properties.6.

Click the General tab, click Internet Protocol (TCP/IP) in the This connection uses the following items list, and then click Properties. 7. In the Internet Protocol (TCP/IP) Properties dialog box, click Obtain an IP address automatically (if it is not already selected), and then click OK.

Note You can also assign a unique static IP address in the range of 192.168.0.2 to 192.168.0.254. For example, you can assign the following static IP address, subnet mask, and default gateway: IP Address 192.168.0.2 Subnet mask 255.255.255.0 Default gateway 192.168.0.1 8. In the Local Area Connection Properties dialog box, click OK.9.

Quit Control Panel. To configure the client computer to use the shared Internet connection, follow these steps: 1. Click Start, and then click Control Panel.2.

Click Network and Internet Connections.3. Click Internet Options.4. In the Internet Properties dialog box, click the Connections tab.5.

Click the Setup button. The New Connection Wizard starts.6. On the Welcome to the New Connection Wizard page, click Next.7.

Click Connect to the Internet, and then click Next.8. Click Set up my connection manually, and then click Next.9. Click Connect using a broadband connection that is always on, and then click Next.10.

On the Completing the New Connection Wizard page, click Finish.11. Quit Control Panel. When you now start Microsoft Internet Explorer, the client computer will try to connect to the Internet by using the host computer’s shared Internet connection.

More information and videos showing the steps can be found at http://support.microsoft.com/kb/306126 Best of luck! Mmesich's Recommendations Linksys WET54G Wireless-G Ethernet Bridge Amazon List Price: $120.07 Used from: $75.00 Average Customer Rating: 3.0 out of 5 (based on 120 reviews) Belkin F5D7330 802.11g Wireless Ethernet/Gaming Adapter Amazon List Price: $127.42 Used from: $103.10 Average Customer Rating: 4.0 out of 5 (based on 42 reviews) Linksys WGA54G Wireless-G Gaming Adapter Amazon List Price: $79.99 Used from: $49.99 Average Customer Rating: 3.0 out of 5 (based on 157 reviews) .

Network Bridge (details below) A similar Q were posted in experts-exchange.com. One of the user suggested an article from microsoft. Com 1 and it solve the asker Q.1 http://www.microsoft.

Com/windowsxp/using/networking/expert/crawford_02april22. MspxSource:http://www. Experts-exchange.com/Networking/Misc/Q_21822980.

Html***Windows XP Home Networking: Building Network BridgesPublished: April 22, 2002By Sharon Crawford, Windows XP Expert Zone Community Columnist A couple of months ago, we needed to add several computers downstairs to our main network, a domain running Windows 2000 servers that is discretely hidden away on the top floor of our house. We didn't have wireless cards in abundance and I drew the line at drilling even more holes in the ceilings for running additional Ethernet cable. So we decided to take advantage of the bridging capability built into Windows XP.

Called the Network Bridge, this is a feature of the Network Connections folder that allows a computer with multiple network adapters to act as a bridge, connecting different local area network (LAN) segments. A Network Bridge is required, for example, to connect different networking technologies such as a wired Ethernet segment and a wireless 802.11b segment. We decided to connect the computers downstairs to each other using Ethernet cable.

Then, by adding an additional, wireless network card to one computer, we could use that computer to connect to the upstairs network and act as a bridge.In this way, all the computers downstairs could connect to the upstairs network and the Internet through the wireless connection. Sure beats threading new CAT5 cable through the walls, and it's a lot cheaper than hiring an electrician to do it for us. You don't need to be connecting two networks to get value from bridging.

Bridging is also useful for connecting a laptop with a built in 802.11b (wireless) card to a cabled network when you don't have a wireless access point—add a wireless card to any other computer on your network and it can bridge the wireless onto the cabled network. Bridging RequirementsTo connect several computers, install a network card in each and run CAT5 network cabling to connect all of them to a hub (and thus each other. ) The computer that will be used for bridging will need both a regular network card for the cabled connection and a wireless network card that will make the connection to the wireless access point (WAP) or gateway on the second network—in our case a Linksys WAP-11 connected to the main upstairs network.

When the two networks have been bridged, the downstairs machines will be assigned IP addresses by the DHCP server and will have access to the Internet. The bridging computer can be running either Windows XP Professional or Windows XP Home Edition. If you use the Home Edition, the bridging computer won't be a member of the domain you connect to but you can use your credentials as an authenticated user on the domain to map hard drives on the domain and thus get access.(for more screenshot and detail step by step procedure, please visit the URL)***Similar article on network bridge.

Software bridge with Windows XP networking tutorialsetting up a software bridge with Windows XP in your home. A new networking feature. Www.homenethelp.Com/web/howto/windows-xp-bridge.

AspConfiguring Windows XP as a Network Bridgewww.windowsnetworking.com/articles_tutorials/wxpbrdge.htmlNetwork bridge - Wikipedia, the free encyclopediaen.wikipedia. Org/wiki/Network_bridge Sources: link inside .

Yes you can, using Internet Connection Sharing See this Microsoft article on how to do it. But allow me to comment that by doing this you are giving up the great advantage of the laptop, its portability. A wireless PCI card or a USB adaptor are only around $20, and it would be a far cleaner solution.

Your desktop could continue to be connected even if your laptop was out of the house.

" "Where can I get a wifi receiver with ethernet connection. I want to connect my directv to the internet." "how to connect Dial up internet connection to two computers through Lan connection. " "How do I know if my laptop can connect to the internet via wireless?

" "How do I connect my PC to the wireless connection in my home?" "i have to keep telling my wireless connection to connect" "How can I make my computer always connect to my wireless connection? I have to do it manually every time. " "I have a desktop and a laptop on wireless connection; now suddenly I can't connect to the network from the desktop--why?" "How do you connect Kindle with wireless connection on laptop?

How does my wireless router connect to the internet.

Where can I get a wifi receiver with ethernet connection. I want to connect my directv to the internet.

How to connect Dial up internet connection to two computers through Lan connection.

I have to keep telling my wireless connection to connect.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.