Do I need to change my Home Theater system in order to listen the new Dolby TrueHD audio format?

Similar questions: change Home Theater system order listen Dolby TrueHD audio format.

Not necessarily I've been delaying my purchase of a new receiver because I wasn't happy with the number of units available with HDMI inputs. So I stopped looking for a couple of months, but the other day I realized a whole slew of new models are out and they're pretty cheap. If your receiver is less than a year old and has HDMI inputs, then you shouldn't have to upgrade.

But if you're like me with an older receiver, then you will have to upgrade. Here's a little info and I'll give you some recommendations further below:It is actually not as difficult as you may think, and you likely won't need to buy any new equipment even if you currently own only a budget-priced home theater. To gain any real benefit from Dolby TrueHD, you will need to have an A/V receiver, as well as a complete 5.1 speaker setup.

Your receiver must have an HDMI input, and/or dedicated analog inputs for at least 5.1 channels of information (your receiver's manual should tell you whether or not you have the correct inputs). Provided you have a compatible home theater setup, actually hooking up your components for TrueHD is easy. Thanks to the firmware upgrade, both the HD-A1 and the HD-XA1 can now output a full resolution Dolby TrueHD-encoded soundtrack via either deck's HDMI port or analog 5.1 outs.So as long as your A/V receiver accepts HDMI or has analog 5.1 inputs, just hook 'em up and you're ready to go.

(Note that both of the Toshiba HD DVD players can also downmix a Dolby TrueHD soundtrack as a DTS bitstream via the SPD/IF output. However, currently you cannot use the optical output for Dolby TrueHD -- sorry, it just won't work.)http://www.highdefdigest.com/feature_introducingdolbytruehd.htmlSo all you really need is a receiver that can handle HDMI, and like I said at the start, they've become easy to find. I'm personally looking at this one, but I'm still waiting a little longer:Sony STR-DA5200ES - AV receiver - 7.1 channelList Price: $1,299.88Price: $899.89http://www.amazon.com/Sony-STR-DA5200ES-receiver-7-1-channel/dp/B000LB3S3Y/But you could go much lower-end, with something like this:Sony STR-DG910 7.1 Channel Home Theater ReceiverList Price: $600.00Price: $329.99http://www.amazon.com/Sony-STR-DG910-Channel-Theater-Receiver/dp/B000OGA802/Or any other receiver that can handle HDMI.

I'm going to suggest you browse through Crutchfield's site. They're not a great place to buy from because their prices can be high, but they're a great place to research this kind of thing:http://www.crutchfield.com/I hope that helps! Sources: http://www.highdefdigest.com/feature_introducingdolbytruehd.html .

Similar Questions: change Home Theater system order listen Dolby TrueHD audio format Recent Questions About: change Home Theater system order listen Dolby TrueHD audio format.

Not necessarily I've been delaying my purchase of a new receiver because I wasn't happy with the number of units available with HDMI inputs. So I stopped looking for a couple of months, but the other day I realized a whole slew of new models are out and they're pretty cheap. If your receiver is less than a year old and has HDMI inputs, then you shouldn't have to upgrade.

But if you're like me with an older receiver, then you will have to upgrade. Here's a little info and I'll give you some recommendations further below:It is actually not as difficult as you may think, and you likely won't need to buy any new equipment even if you currently own only a budget-priced home theater. To gain any real benefit from Dolby TrueHD, you will need to have an A/V receiver, as well as a complete 5.1 speaker setup.

Your receiver must have an HDMI input, and/or dedicated analog inputs for at least 5.1 channels of information (your receiver's manual should tell you whether or not you have the correct inputs). Provided you have a compatible home theater setup, actually hooking up your components for TrueHD is easy. Thanks to the firmware upgrade, both the HD-A1 and the HD-XA1 can now output a full resolution Dolby TrueHD-encoded soundtrack via either deck's HDMI port or analog 5.1 outs.

So as long as your A/V receiver accepts HDMI or has analog 5.1 inputs, just hook 'em up and you're ready to go. (Note that both of the Toshiba HD DVD players can also downmix a Dolby TrueHD soundtrack as a DTS bitstream via the SPD/IF output. However, currently you cannot use the optical output for Dolby TrueHD -- sorry, it just won't work.

)http://www.highdefdigest.com/feature_introducingdolbytruehd.htmlSo all you really need is a receiver that can handle HDMI, and like I said at the start, they've become easy to find. I'm personally looking at this one, but I'm still waiting a little longer:Sony STR-DA5200ES - AV receiver - 7.1 channelList Price: $1,299.88Price: $899.89http://www.amazon.com/Sony-STR-DA5200ES-receiver-7-1-channel/dp/B000LB3S3Y/But you could go much lower-end, with something like this:Sony STR-DG910 7.1 Channel Home Theater ReceiverList Price: $600.00Price: $329.99http://www.amazon.com/Sony-STR-DG910-Channel-Theater-Receiver/dp/B000OGA802/Or any other receiver that can handle HDMI. I'm going to suggest you browse through Crutchfield's site.

They're not a great place to buy from because their prices can be high, but they're a great place to research this kind of thing:http://www.crutchfield.com/I hope that helps! Sources: http://www.highdefdigest.com/feature_introducingdolbytruehd.html .

I'm looking for something easy to install that I can use to listen to CD's.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.