How do I connect my laptop to my office network which has net connection thro ADSL modem. ethernet bw adsl and hub?

How do I connect my laptop to my office network which has net connection thro ADSL modem. Ethernet bw adsl and hub, my office network receives net connection thro adsl modem. There is ethernet connection between adsl modem and hub and hub to all computers.

Now I have to connect my laptop to access my office network and internet. Asked by raja2k9 38 months ago Similar questions: connect laptop office network net connection thro ADSL modem ethernet bw adsl hub Computers > Internet.

Similar questions: connect laptop office network net connection thro ADSL modem ethernet bw adsl hub.

Hmmm, some issues need to be addressed here... First, from what you have said, the DSL modem is plugged into an Ethernet hub. This raises two questions: (1) is the DSL modem just a modem such as a Siemens SpeedStream or is it a gateway souch as a 2Wire DSL modem/router? If the former, then do you have a router that it plugs into or is the modem hooked only to what you are calling a hub?(2) What are the actual devices that you are calling hubs?

Ethernet, including Fast Ethernet (which is the 100Mbps network topology most often used today), does not use hubs. At the oldest (and worst), it uses concentrators. Most frequently nowadays, switches are used.

I will address the possible issues in turn. First, if you have a DSL modem but no router, then get a router (assuming this is something you are authorized to do in your office). This not only protects all the machines in the office from invasion by worms and hackers but simplifies everything else.

Make sure that you configure the router correctly by changing the default password and, if it has wireless capabilities, changing the SSID and setting at least WEP encryption. Also, if you have been using static IP addressing up to this time, then change everything over to DHCP (if this will cause no problems with anything else in the office) as your router has a built-in DHCP server. If the DSL modem is a gateway, then everything should be getting a DHCP-assigned IP address at this time and, thus, when you plug your computer into the network, it should also get an address.

Make sure that you are starting it up from a real reboot, though, not from hibernation or sleep mode. Both could cause the computer to try to maintain the IP address it had from the last assignment it received (such as from your home router) and, thus, not give you access.(You would need to use IPConfig to release and then renew the IP address or reboot if you are not comfortable using a command line interface. ) Now, as for the "hub" issue.

If the network actually has concentrators (which were used 10-15 years ago before switches became the mainstay of the Ethernet network), replace them with modern switches. Not only will this make your network faster and more efficient, it will tend to help make your intraoffice communication more secure. Switches operate by establishing virtual links between two ports.

For example, if you have four computers labeled A, B, C, and D in the office and all are on a typical concentrator, then when computer A wishes to talk to computer B, even if the two are sitting right next to each other, computers C and D receive the data as well. Further, while one computer is transmitting, no other computer is able to transmit on a concentrator. With a switch, communication is very different.

A switch has some built-in intelligence: it knows the addresses of the machines attached to it. Thus, when computer A wishes to transmit to computer B, it established a private channel for the two of them to communicate. While that is happening.

Computer C wishes to talk with computer D. This can happen at the same time because the two conversations are happening on two separate channels. Therefore, the computers do not have to wait and take turns communicating as they would on a concentrator.

This allows data to flow more quickly and freely than in the older hardware. As there seem to be some questions here as to the way your network is configured as well as what you may or may not be permitted to do, I cannot give you a definitive "this is what you need to do" answer but I hope that all I have said here gives you some pointers in the right direction. If you have any further questions or would like more information, please feel free to contact me.

Sources: 20 Years of Professional Experience Cillchaoi's Recommendations Siemens Efficient Networks SpeedStream 5100 - DSL modem ( 12A-5100-701 ) Used from: $32.99 Common DSL Modem Cillchaoi's Recommendations HP AdvanceStack Hub 14 - Hub - 12 ports - Ethernet (100VG) - 100VG-AnyLAN - stackable Old style 100Mbps concentrator; this was specifically for HP's proprietary 100VG-AnyLAN topology. Cillchaoi's Recommendations NETGEAR FS608 8-Port Fast Ethernet Switch Amazon List Price: $60.00 Used from: $23.00 Average Customer Rating: 4.5 out of 5 (based on 15 reviews) A common Fast Ethernet switch in use today Cillchaoi's Recommendations Actiontec 54 Mbps Wireless-G DSL Gateway Modem Amazon List Price: $143.40 Used from: $30.00 Average Customer Rating: 3.0 out of 5 (based on 25 reviews) One of many types of DSL Gateways available .

1 Need more information. Are you INSIDE the company trying to connect, or are you trying to connect from outside, like your home. That makes a big difference.

Also, does the company network have a firewall? Also, does the company network support the use of a VPN? FInally, does the company assign static IP addresses, or does it use DHCP to assign addresses to computers.

These are crucial questions.

Need more information. Are you INSIDE the company trying to connect, or are you trying to connect from outside, like your home. That makes a big difference.

Also, does the company network have a firewall? Also, does the company network support the use of a VPN? FInally, does the company assign static IP addresses, or does it use DHCP to assign addresses to computers.

These are crucial questions.

Most laptops have an ethernet port. You'de need to check with your IT people about any proxy or group policy restrictions they have in place.

If by cable you should just be able to plug in to an ethernet jack and run the network setup to connect, providing your company network will allow that.

" "Can I connect a usb modem via ics(internet connection shearing)to a adsl modem.

I want to connect a satellite decoder to ADSL modem, so that I could be able to watch movie and sport tv.

Can I connect a usb modem via ics(internet connection shearing)to a adsl modem.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.