How do I reset the ioSafe R4 to factory default?

Resetting the ioSafe R4 back to factory default will wipe out all configuration and data. Please understand this before continuing. If you choose to continue, here are the steps: • Power down the ioSafe R4.

€¢ Locate recessed factory defaults switch on the front of the R4. €¢ Get a straightened paper clip and depress the recessed switch while the power is off, and then power on the ioSafe R4, keeping the switch depressed for about 30 secs. €¢ You will see the drive LEDs in the front blink once at about 5 secs and again at about 30 secs.

Release the switch at the 2nd blink. There will be a 10-minute window where you can use RAIDar to change the RAID mode and/or select the snapshot reserved space. RAIDar will prompt with "Click Setup".

If you do not click Setup, the installation will begin with the default settings. Otherwise, it will begin when you've confirmed your selected option in RAIDar. You can monitor the installation progress with RAIDar.

More.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.