How do you replace front wheel bearings on a 1999 Pontiac Grand Am?

The wheel bearings are part of a hub on the 1999 Grand Am. A new hub is a little over $100 dollars. To get it off, you must first pull off the wheel, the brake caliper and bracket that holds the brake pads.

There are 3 bolts on the back side of the strut tower that need to be removed. You will need a 36mm impact socket to remove the axle nut. An electric or air impact wrench will ease the removal of the nut.

You will strain yourself if you just try to use a ratchet. A slide hammer will need to be used to separate the hub from the axle. Make sure that you disconnet the wire plug going to the traction control that is connected to the hub.Be careful when using the slide hammer so as not to pinch the wires from the traction control when the hub is completely loosened from the axle.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.