My printer won't print black ink?

Following points explain the different ways to fix the problem of the printer not printing black: Turn off the Plastic protective tape: You could find the root cause by performing different steps. One of the easiest methods is that you need to make sure that the plastic protective tape which is usually used on the new black cartridge is off. Usually the user makes this mistake.

This mistake might occurs due to absent-mindedness. The reason could also be some distractions which happen while loading the new black ink cartridge. Calibrate the printer: You need to calibrate the printer.

You are not supposed to skip this process. After loading a new printer you need to do the calibration without fail. You could get the black ink into work back.

For this you need to run ‘Self Test Diagnostic‘. Along with this you need to also run the ‘Print Cartridge Alignment‘. This would help you to get the black ink to work.

Clean black ink cartridge: You could clean the black ink cartridge. For this you need to remove the black ink cartridge which is present in the printer. In order to clean the laser or scanner block you could use a cotton swab as it would fully clean the dirt.

You need to clean the grime and the dried ink present in the printer. This would remove all the hindrances which prevent the ink from flowing. Cleaning the printer heads would also help to solve the problem.

Maybe the remaining ink in your cartridge is not enough to reach the print head.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.