How do you change a 2005 Chevy Malibu rear tail light?

How to Change tailights on 2005 Malibu & Malibu Maxx On a 2005 Chevrolet Mailbu 2.2L 4 cylinder REMOVE TRUNK LINER: Open your trunk. On whichever side you are changing, locate and remove the two plastic nuts by hand. Pull back the trunk liner and there will be two more plastic nuts securing the tail light assembly in the trunk area.

Remove those two plastic nuts, by hand as well REMOVE TAIL LIGHT: Now, look at the tail light (outside of the trunk) and you will see a black plastic piece, that attached and secures the tail light to the car body. Find the black Philips head screw and remove REMOVE BULB: Tail light assembly should become loose. Pull the assembly gently away from the car body.

You have reach the light bulbs, twist the light assembly to remove the dead bulb. Pull whichever bulb needs to be changed and remove wires and replace wires on to new bulb and push back in bulb and then screw all plastic pieces back on REVERSE PROCESS TO FINISH On Malibu Maxx models (2004, 2005, 2006, 2007) with hatchback, there are no wing nuts! Do not remove plastic trim inside rear quarter panel.

Remove the two Philips head screws. The lower portion of the tailight assembly will still be fixed to the vehicle. Pull firmly to un-snap third and final fastner.

You may want to insert a putty knife at the height of the backuup light.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.