Remove trimmings on the front bumper cover to allow access to the bolt for removal of the front bumper. The trimming can be removed simply by prying the trimming from the center of the bumper cover using a Philips screw driver. After removing the 2 bolts on the bumper cover, you may open the hood and remove the plastic fasteners on the top of the bumper.
To remove the plastic fastener, simply depress the center until click. Do not press too far or the fastener will be damaged. Turn the Torx screw in the wheel well counter clockwise to loosen the catch plate on the bumper.
Lift the bumper cover over the catch plate and push the bumper cover forward. This completes the removal of the front bumper cover. To remove the headlight assembly, you will need to loosen the bolt on the retainer near the wheel well.
You will then remove the 4 bolts that hold the headlight assembly. There is one bolt on the side of the headlight assembly. Two bolts on top and one at the corner of the lens.
They ... more.
I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.