How do you wire four lights operated by a four way and a 3 way switch?
Stick two in one and put the other two in seperately.
It is highly recommended that these ground connections be completed first, then gently folded into the rear of the box - out of the way - leaving only the shorter ground leads out for easy connection to devices. No ground connection is made to plastic, fiber or other non-conductive box. 8Connect feed wires in the first switch box.
Connect all ground wires as previously described. The 2 wire cable feed from the power source enters the bottom of the switch box and the hot (black) wire connects to the common or shunt terminal on the 3-way switch. There is only one such terminal on a 3-way switch.
This terminal is usually identified as the one having a different color terminal screw (often significantly darker) from the other two terminal screws (not counting the green ground screw). In the picture of the circuit above, the shunt or common terminal is on the lower right side both of the switches. Shut power off.
This is a very important step.
I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.
Related Questions
How do you wire a light fixture that has a white wire black wire and a ground wire if you only have a white wire and a black wire coming from the wall?
Where do you connect the fuse cable wire from a car stereo you have a Red wire that is the live a black wire that is earth and a yellow wire that is for fuse where do you connect the yellow wire too?
When installing a Y-shaped electric range plug and it has places for three wires and you have a black wire white wire and a bare copper wire so which wire goes where?
Red wire,black wire,white wire,green wire, which is live?
1985 dodge ram the tail lights won't work with the lights on both turn signals blink when you turn on the drivers side and there are no brake lights with the lights on what could be the problem?
I have halogen lights in the bathroom one day they kept flashing on and off and now don't come on at all if you try to switch them on the trip switch for all lights in the house goes off If you turn?