How to change a low beam on a 94 Olds Cutlass Ciera?

Headlight lamp R&R Remove the three T-15 Torx screws holding the corner marker light housing in. This will expose two 10mm hex head caps screws. Remove these and the two others on the inboard side of the housing by putting a socket on a long extension through the second slot in the grille.

The housing is then unbolted, but a ridge on the inboard side is trapped behind the grille. I loosen the grille and wiggle the housing from the outside edge toward the outside of the vehicle. Then remove the blue wire clip and the terminal.

The angled housing will then come out by turning it clockwise in to release the bayonet connection.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.