How to troubleshoot a headlight low beam or high beam outage in a Ford Explorer?

Items to Troubleshoot Check the following Fuses In the power distribution box under the hood, fuse 11 (20A) In the interior fuse panel, fuse 33 (15A) for the high beams should be intact In the interior fuse panel, fuses 4 and 8 (10 A each). These feed the low beams downstream of the headlamp and the Multifunction Switch Multifunction Switch (turn signal stalk) This switch may make a buzzing sound when switching between high and low beams Message Center Console - Lights Out Module (LOM) LOM - If you have a model with the Message Center you will have a LOM. You access it by removing the center console (just pull up firmly).

You can replace it or you may be able to solder a faulty connection. It is common for the connections to work their way out or for the module itself to go bad Models with no Message Center Console do not have an LOM.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.