Why do I not hear any dial tone even after pressing the ATA 186 function button?

A. ATA 186 will not give dial tone for the following reasons: • The attached telephone and/or its cable is faulty or they are not connected properly. • The ATA 186 ports/lines with telephones attached have no assigned UIDs (telephone numbers).

You can assign UIDs via the web browser or by using the voice IVR menu. Most likely port 0 will be used since the IVR menu functionality is available to line 0 only. Press 3 for port 0 and press 13 for port 1.

• The ATA 186 is in the process of getting an IP address through DHCP. DHCP is enabled by default after version 2.11. If static IP address configuration is needed, disable DHCP . For the cases where DHCP is required, please make a sanity check on the DHCP server and the connectivity in between.

• The ATA 186 is trying to register with a gatekeeper, the IP address of which is specified in the GKORPROXY parameter. Please check the IP address of the gatekeeper, please make a sanity check with the Gatekeeper and the IP connectivity in between.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.