How do you realign your passenger back window when it has fallen off track on 2002 Explorer?

First of all, this is a Recall Item. Get it replaced by the dealer. However, if you want to do-it-your-self then read the following.

I will describe how to remove back window and then replace it. It does not need a complicated alignment. You will need someone to help you to hold the window 1.

Gently remove the plastic cover from inside so you can see the nut of the joints and disconnect the wiper cable. 2. While widow is fully open (ask the assistant to hold it), remove the clip for each side from the piston rod by a screw driver.Do not lose the clips.

The clip is at the window side not the body side. 3. While the assistant is holding the window, unscrew both sides and disconnect the window from the body.

You will need Hex key screwdriver. 4. If you are changing the joints, unscrew them from the body of the car.

You will need a socket and socket wrench to unscrew the nut from the body To install window: 1. Install the new joints to the body of the car and screw it to the body.2. Screw the window to the new joints using the hex screwdriver 3.

Here comes the alignment part. Ask your assistant to fully open the window and hold.4. You try to connect the piston rod to the window until it clicks to indicate that it is connected.

Now put the clips again.5. That is it.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.