How do you remove the door panel for a 1998 Dodge Stratus?

Answer if it is anything like a 96 yopu will have to pull of the speaker grill(just use a screw drinver stick it in between the grill & th panel and you should be able to pop it off.. then there should be sum screws there , there will be one in the door handel where you pull the door closed there will be one in the door lever to open the door and then check over the whole thing I think there's one more in front and back not sure tho .. then get yourself a long screw drive stick it between the botom of the (plastic)panel and the inside of the door and pry it should pop pritty easilythen grab it and pull up and you should be home free just do the opposit to put back in put all the screws back and tap it with your hand a few times to make sure all the clips are in.

The plug inside the door handle. Phillips head screw. Removed the Phillips screw behind it.

Of the door (i.e. Away from the hinges). Connecting rod from the back of the door lever.

Plastic tab and pulling firmly. The black sheet is a dust cover. Dodge Stratus front door panel.

The door handle. The door lever. Two screws at the bottom of the door panel.

From the metal door shell. Would be freed. Door panel away from the door.

Release tab and pulling. Back of the door panel. Which needs to be peeled away to work inside.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.

Related Questions