How do you clean inside of headlamp 97 Mercury Tracer?

This is also true for most Tracer Projector Foglights. Is this HID Conversion kit legal for street use on my Tracer’s headlight or foglight assemblies? Laws vary by jurisdiction, but so long as you have pointed the headlamps on your Tracer pointed downward so your new HID Lights aren’t blinding other drivers (or police officers!) you will probably avoid trouble.

Some areas such as certain Canada communities require that the High Beams on your Tracer match the Low Beams, so if your low beam is HID, then your High Beam must be HID as well. Please do not install a single filament H.I.D. headlight kit if your community has such a law and your stock bulbs use one dual filament for both high and low beam functions. How do I aim my Tracer Headlamps to keep my HID lights from blinding other drivers?

Usually there are little gears with screws on the inside of your Tracer’s headlamps. You can usually turn these by hand or with a screwdriver. I have the premium package/higher model for my Tracer and my vehicle came with stock OEM HID Xenon lights already.

Can I use your Tracer HID Conversion kit to replace my factory HID kit? Sorry, but no. If your Tracer came pre-equipped with an H.I.D. kit, you will need to buy a different type of HID bulb (D2C, D2S, etc) and ballast, usually referred to as a “Stock Replacement HID Bulb / Ballast.”

Our kits are CONVERSION kits and are made to work with stock halogen bulb harnesses only. Though rare, if your Tracer came with stock HID foglights, then the HID foglight kits we offer would also not work. I don’t want junk parts on my Tracer, what is the warranty on this HID conversion kit?

Every Tracer HID Headlight kit and Tracer HID Foglight kit we sell is valid for warranty replacement for 1 year from the original date of purchase so long as they are properly installed on your Tracer, unmodified, and used for normal daily driving. Install the new HID light bulbs into your Tracer’s headlights. Be sure to use clean rubber gloves or avoid touching the glass on the HID light bulbs.

Dirt or oil left on the glass of the bulb could cause the xenon gas to overheat and blow up the bulb. Lock the HID light bulbs into place. Connect the stock wiring harness from your Tracer to the corresponding plug (or plugs, depending on your bulb type) on the HID Light Bulbs.

Connect the remaining 3 plugs to the corresponding plugs on the HID Ballast. Find a place to mount the ballast where it will be stable, away from heat, and not touch any moving parts in your Tracer’s engine bay. Use the included installation brackets, zip ties, or double sided tape to mount the ballast in place.

Reconnect your Tracer’s negative battery terminal. For HID lights installed into your headlights, aim your headlights down so that the Tracer HID kit will not blind others drivers in front of you. Please see your Tracer owner’s manual for head lamp aiming instructions.

Aiming may also be necessary for HID Fog Lights. ENJOY A SAFER DRIVE WITH YOUR NEW SUPER BRIGHT HID LIGHTS!