How do you install a valve cover gasket for the 1994 Honda Accord EX?

Pretty easy. Remove the valve cover by loosening the 5 bolts holding it in place. There are a couple of hoses and another screw that will need to be removed as well If the valve cover has been on the engine for some time, you may need to apply sufficient force in breaking the valve cover/gasket loose from the engine The gasket lies beneath the valve cover along its edge.

The edge is lipped so the new gasket can be placed in this groove A Honda dealer will typically apply an additional sealer to the new gasket above the semi circular portions at either end of the valve cover, but I don't believe this is required. (Pretty expensive to buy the tube for just one application. ) Replace valve cover with new gasket installed.

Tighten bolts, replace hoses. Done Not done. Don't forget the O-rings around the spark plug openings in the valve cover.

These should come with the new valve cover gasket.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.