How to wire ceiling fan light kit (pull chain only) with two black wires that connect to blue & white wires from fan?

How to wire ceiling fan light kit (pull chain only) with two black wires that connect to blue & white wires from fan light fixture has three bulbs each with white and black wires. If I hook one of the black wires from the light switch (pull chain) to the white wire and one to the blue wire, lights will not turn off with pull chain. Should I just attach one black wire from pull chain kit to the other black wires, and cap off the remaining black wire from the pull chain kit.

There is no black wire coming from the fan, only blue and white. Asked by slinder 30 months ago Similar questions: wire ceiling fan light kit pull chain black wires connect blue white Home > Home Improvement.

Similar questions: wire ceiling fan light kit pull chain black wires connect blue white.

Here is a step by step tutorial showing black and white wires. The ceiling fan comes equipped with wiring for a light to be added. This light may be connected with a black and white wire or a special plug-in connection.

Connect the wires using wire nuts and tuck them into the housing. Align the mounting holes on the light with the mounting holes on the ceiling fan. Now, tighten the mounting screws.

Install the ceiling fan support housing that will cover the mounting bracket and junction box area. This just slides over the mounting pipe for now. Connect the white wires together (neutrals), the black wires together (the light feed), the green wires together (the ground), and the red wire to the fan connection wire (marked "fan" with a tag).

Use wire nuts to make these connections and then tuck these wires neatly in the area around the support bracket. Remember, the housing cover will need to cover these wires and none of the wires can be sticking out from under the cover. Once everything is connected, lift the fan and line the cover holes up with the bracket.

Secure the cover with the screws provided and tighten snugly. This step may require an additional person to either hold the fan or insert and tighten the screws. Sources: electrical.about.com/od/diyprojectsmadee... .

Wiring a Ceiling Fan/Light INSTRUCTIONS1) Install the electrical boxesCut an opening in the wall for the switch box that will hold both the light switch and fan controller, and another opening in the ceiling for the fan's electrical box. Install SwitchboxUsing fish tape, pull No. 12-2g NM cable from the breaker panel or a nearby available electrical source (if there is room on the circuit for the equivalent of two extra fixtures) to the switch-box opening and No.12-3g NM cable from the switch box to the fan box opening in the ceiling.

Using a screwdriver and hammer, punch out a knockout in the switch box, install the switch box in the opening, and pull both cables (from the power source and to the fan) into the box. Secure the cables in the box with clamps. Using cable rippers, rip open about 6 inches of sheathing off each cable and strip 3/4 inch of insulation off each of the wires.Do the same for the cable in the fan box.

(Figs.1 and 2)The three-wire cable from the switch box to the fan box allows you the option of controlling the light and fan independently. If you decide that you do not want to have independent control at the moment, run the three-wire cable anyway so you will preserve the option for later. Install Ceiling Box and Mount 2) Wire the electrical boxesAlthough there are two ways to run power to a ceiling fan/light — through the ceiling box or through the switch box — the preferred way is to bring power to the fan/light through the switch box.

This makes troubleshooting a lot easier should problems arise later and minimizes crowding wires in the ceiling box. (However, do not overlook the convenience of using a power source in an existing ceiling light that will be replaced by the new fan.)After installing an approved, properly supported ceiling box, mount the fan hanging bracket that comes with the fan according to manufacturer's instructions. With many styles of fans, you can hang the fan body on this bracket while you make the electrical connections.

The unit may come with the wires for the fan and the light connections tagged. If so, connect these wires to the appropriate switch wires. Otherwise, follow this wiring suggestion:In the fan/light ceiling box, splice together the black hot wire from the fixture and the black lead wire (hot) from the fan switch, and cap the connection with a wire connector.

Connect the red (or blue) hot wire from the fan/light to the red lead wire (hot) from the light switch. Next, connect the white neutral wire from the switch box and the white neutral wire(s) from the fixture. Then splice the green grounding wire from the fixture to the bare-copper grounding wire from the switch box; if the ceiling box is metal, be sure to connect a pigtail ground wire from the grounding splice to the ground screw on the box (Fig.

3). After you are finished wiring, install the decorative escutcheon plate with screws and then attach fan blades according to the season and air flow you desire. Wiring with SwitchesIn the switch box, pigtail the black feeder wire (hot) to both the light and fan switches, and connect the white neutral feeder to the white neutral wire from the fixture.

Then connect the hot wires in the three-wire cable from the fixture to their respective switches; the red wire connects to the light switch and the black wire to the fan switch (Fig.4). Push the switch wires into the box, screw the switches into place, and install the cover plate Sources: http://www.realtor.com/home-garden/do-it-yourself/electrical/wiring-ceiling-fan-light.aspx .

The site below can help with the installation. The ceiling fan comes equipped with wiring for a light to be added. This light may be connected with a black and white wire or a special plug-in connection.

Connect the wires using wire nuts and tuck them into the housing. Align the mounting holes on the light with the mounting holes on the ceiling fan. Now, tighten the mounting screws.

Sources: electrical.about.com/od/diyprojectsmadee... .

How to Install a Ceiling Fan Light Kit The ceiling fan comes equipped with wiring for a light to be added. This light may be connected with a black and white wire or a special plug-in connection. Connect the wires using wire nuts and tuck them into the housing.

Align the mounting holes on the light with the mounting holes on the ceiling fan. Now, tighten the mounting screws. Sources: electrical.about.com/od/diyprojectsmadee... .

1 Splice the three black wires from the 3 lamp sockets to any one of the wires coming from the pull chain switch, take the other wire from the switch and splice it to the blue wire , take the three white wires coming from the lamp sockets and splice them all together with the white wire from the fan. What you have done is connect the hot wire to one side of the switch and then to the lamps , then you have connected the hot blue wire to the other side of the switch -this switches the hot wire on and off. The white wires aka the return or neutral bypass the switch and go to the white return wire , that is the proper way to switch a hot wire from on to off and use the white wire as a return to the power source.

Splice the three black wires from the 3 lamp sockets to any one of the wires coming from the pull chain switch, take the other wire from the switch and splice it to the blue wire , take the three white wires coming from the lamp sockets and splice them all together with the white wire from the fan. What you have done is connect the hot wire to one side of the switch and then to the lamps , then you have connected the hot blue wire to the other side of the switch -this switches the hot wire on and off. The white wires aka the return or neutral bypass the switch and go to the white return wire , that is the proper way to switch a hot wire from on to off and use the white wire as a return to the power source.

I have a black an white wire comifrom the ceiling and the same from the fan plus a blue wire what do I connect to what" "I have white and yellow wires coming from ceiling. Is the yellow the black (hot)" "hall light, I have one white wire and 5 brown wires coming into the light" "what color wire in a ceiling fan do I connect to the red wire from that house? " "Replacing a light - have black and white wire from ceiling - have one cord from fixture with three uncolored wires?" "I have a ceiling fan that didn't have light,i bought a ceiling fan light kit, hooked it up now fan don't work" "can you convert a ceiling light kit to just a ceiling light without a fan?

" "I am changing a pull chain switch to my ceiling fan, the switch has 2 black wires coming out of it. Their is a white w" "I have a pink wire coming from the ceiling Do I conect it to the black/white wire in the ceiling fan?" "how do you wire a ceiling fan w/light using 3 wall switches?

I have a black an white wire comifrom the ceiling and the same from the fan plus a blue wire what do I connect to what.

I have white and yellow wires coming from ceiling. Is the yellow the black (hot).

Hall light, I have one white wire and 5 brown wires coming into the light.

I have a ceiling fan that didn't have light,i bought a ceiling fan light kit, hooked it up now fan don't work.

I am changing a pull chain switch to my ceiling fan, the switch has 2 black wires coming out of it. Their is a white w.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.