If one switch controls a fan and a light but the dimmer part for the light does not work and the switch gets warm after a while what could be the problem?

Answer I'm going to assume that the switch that's getting warm is the dimmer. Even when a dimmer is working correctly it gets warm and that's just the electronic parts of it. The face of a dimmer is actually a heat sink to help remove excess heat If you swap out the dimmer you will likely find your problem is resolved.

Remember to de-energize the circuit by turning off the breaker before working on it If in any doubt, consult a qualified electrician Andy Answer Be aware that a dimmer for lights does NOT work for fans (though it may sometimes appear to work, you can end up with noise, problems such as the light attached to the fan not working, the dimmer getting overheated, etc). So even though it might seem to work at first, you'll have problems, and it's against code to put the wrong kind of dimmer there. You can purchase a dimmer which is rated for ceiling fans at Home Depot or Lowes, but they are more expensive than light switch dimmers Of course, if there is a single on/off switch at the wall which controls the fan and its light, then you might be better off buying a remote control unit to install in the fan - it will allow you to dim the fan and light separately (and safely).

Or purchase a new fan with a remote... ceiling fans are cheap enough now that if yours is old enough, it might be a nice time for an update.

I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.