Is it hard on a Honda Foreman engine if you install a clutch kit jet kit and a high performance pipe?
Answer I have all of the above and the only thing that is hurting my bike is the fact I let a buddy use it under the condition he changed the oil and he put the oil filter in backwards. Then the guy I had fix the top end after oil starvation didn't check the oil pump and it is burnt up again.
My quad was ripping so I was hesitant to change the jet. But, FMF recommended to run the kit, so I did. After reading the informative yet slightly complicated trouble shooting and jet selection page.
I installed the needle, main jet, and fuel mix adjustment screw which was very easy(installation directions was great). I notice my stock jet is #145, so I install the recommended jet #148, slightly larger. But when I ran it, at mid throttle it bogged and couldn't run great.
I was very surprise, so I changed the jet to a larger #150, and it still bogged. I then decided to install the stock jet back in just to see what would happen and it started to ripp again. The needle setting was the only thing that I found useful in the kit.
I did compare the needles and the FMF was slighter more tapered. If you are planning to continue your build or mod, this kit would be great because it comes with many jet sizes for your mod needs. The kit does include #146 which is a size in between the stock and recommended #148(didn't work) that I haven't tried yet, but the stock jet runs SUPER, so I'm gonna leave it until I feel like taking out the carb again.
Also, I'm gonna get a CDI with higher RPM to see if that would make a difference. But, I will say that with the jet changes.. my quad does redline a little faster, because I do notice that I have to shift 1st and 2nd gear faster, so acceleration did improve. I also can easily wheelie my quad now, low end seems more responseful.
That why I'm giving it a 4 star.
I cant really gove you an answer,but what I can give you is a way to a solution, that is you have to find the anglde that you relate to or peaks your interest. A good paper is one that people get drawn into because it reaches them ln some way.As for me WW11 to me, I think of the holocaust and the effect it had on the survivors, their families and those who stood by and did nothing until it was too late.
Related Questions
You want to replace old lead pipe connected to cast iron sewer pipe with copper How do you connect the copper pipe to the old lead pipe or to the cast iron pipe?
How do you know what is broken on a 94 Nissan Sentra with cable clutch when the clutch won't disengage gears and there is no tension on clutch pedal and heard a loud snap before tension lost?
I have an 89 f150 5 speed with the 300 l6 engine. I pressed the clutch in to move it but the clutch pedal didn't return.?
Is the pipe available in both ductile iron pipe size and iron pipe size outside diameters?
Is the pipe available in both ductile iron pipe sizes, metric and iron pipe size outside diameters?
If I put a oil with additive in a goldwing and the clutch started to slip would that burn out the clutch are worst?